 |
| Quantity: | |
|---|---|
product description
The knife anti-rust tester uses the corrosion test to check the rust spots as the basis for judging the anti-rust performance of the knife. The anti-rust ability of stainless steel tableware without coating is evaluated, and the knife anti-rust tester uses the bending test as the basis for judging the bending resistance of the tool; It is an important tool for tool manufacturers and tool sales units to test the quality of blades
experiment procedure:
1. Clean the sample with hot soapy water, and wipe the cleaned sample with alcohol;
2. Clamp the sample and soak it in 1% NaCI solution at 60°C±2°C (up to 62°C); 3. Set the test speed: 2-3 times/minute, test time: 6H; 4. After the test is completed, clean the water stains with a clean cotton cloth, use wires with a diameter of 0.4 mm and a diameter of 0.75 mm, and place them on the surface of the sample in contact with the surface of the sample to check the degree of damage under a magnifying glass of at least 4 times.
Product parameter table
| Box fixture material: | Thermoplastic |
| Test time: | 6H |
| Solution: | 1%NaCI solution |
| Test speed: | 2-3 times per minute |
| Temperature range: | 4x magnifying glass |
| Magnifying glass: | 60℃±2℃ |
product description
The knife anti-rust tester uses the corrosion test to check the rust spots as the basis for judging the anti-rust performance of the knife. The anti-rust ability of stainless steel tableware without coating is evaluated, and the knife anti-rust tester uses the bending test as the basis for judging the bending resistance of the tool; It is an important tool for tool manufacturers and tool sales units to test the quality of blades
experiment procedure:
1. Clean the sample with hot soapy water, and wipe the cleaned sample with alcohol;
2. Clamp the sample and soak it in 1% NaCI solution at 60°C±2°C (up to 62°C); 3. Set the test speed: 2-3 times/minute, test time: 6H; 4. After the test is completed, clean the water stains with a clean cotton cloth, use wires with a diameter of 0.4 mm and a diameter of 0.75 mm, and place them on the surface of the sample in contact with the surface of the sample to check the degree of damage under a magnifying glass of at least 4 times.
Product parameter table
| Box fixture material: | Thermoplastic |
| Test time: | 6H |
| Solution: | 1%NaCI solution |
| Test speed: | 2-3 times per minute |
| Temperature range: | 4x magnifying glass |
| Magnifying glass: | 60℃±2℃ |
