Microcomputer Controlled Low Frequency Cyclic Tensile Testing Machine

This machine is mainly suitable for metal, non-metal and composite materials tensile and low frequency cyclic tensile test mechanical properties, can realize the stress, strain, speed and other combination command control. According to GB, JIS, ASTM, DIN and other standards automatically obtain the maximum test force value, yield strength, yield point up and down, tensile strength, number of cycles and other parameters, automatically generate test report format, and can print test report curve at any time.

Availability:

Quantity:



Inquire Add to Basket

Product Description

Basis standard

1, according to GB/T2611-2007 "testing machine general technical conditions" and GB/T 16491-2008 "electronic universal testing machine" standard manufacturing;

2, according to GB/T12160-2002 "uniaxial test for extensionometer" and GB/T16825-2008 "tensile testing machine test" verification and acceptance;

3, applicable to GB, JIS, ASTM, DIN and other standards.

Testing machine type		HJ-6105	HJ-6205	HJ-6305	HJ-6405	HJ-6505
Maximum dynamic load (kN)		±100	±200	±300	±400	±500
Test frequency (Hz)		Low cycle fatigue 0.01~20, high cycle fatigue 0.01~50, customized 0.01~100
Actuator stroke (mm)		±50, ±75, ±100, ±150 and customized
Test load waveform		Sine wave, triangle wave, square wave, oblique wave, trapezoid wave, combination of custom waveform
Measurement accuracy	load	Better than the indicated value ±1%, ±0.5% (static); Better than indicated value ±2% (dynamic)
	deformation	Better than the indicated value ±1%, ±0.5% (static); Better than indicated value ±2% (dynamic)
	displacement	Better than the indicated value ±1%, ±0.5%
Test parameter measurement range		1~100%FS (full scale), can be extended to 0.4 ~100%FS			2~100%FS (full scale)
Test space (mm)		50~580			50~580
Test width (mm)		500			600
Oil source configuration (21Mpa motor power)		20L/min (7.50kW), 40L/min (15.0kW), 60L/min (22.0kW),00L/nin (37.0kw) discharge oil sources work in combination according to requirements, with optional pressure of 14, 21, 25mpa