 |
| Quantity: | |
|---|---|
hongjin
Equipment principle:
High-altitude low-pressure simulation test chamber is also known as aviation simulation transport test chamber. It can reach the low-pressure storage state of the sample in a short time, and can automatically control the test cycle (for example, 6H0, monitor the pressure change in the chamber throughout the process, and realize the automatic termination of the test). The controller is controlled by touch screen, which can form a unified testing standard within the enterprise; the vacuum chamber body is made of plexiglass, which has high transparency and good perspective. It can clearly observe the entire test process and can intuitively reflect the leakage point. It is convenient and flexible to use.
| Inner box material: | SUS201# stainless steel,Thickness 3mm | ||
| Outer box material: | A3 cold plate paint,Thickness 1.5mm | ||
| Pressure range: | 0.5～100Kpa Common test air pressure 11.6 Kpa | ||
| Inner box size: | W500xH500xD500mm | ||
| Outer box size: | W650xH1300xD650 | ||
| Storage partition material: | Stainless steel | ||
| Vacuum display: | Digital vacuum gauge control,accurate display of vacuum degree, easy to set vacuum degree | ||
| Timer: | LED digital display, freely settable within 0-9999 hours (H/M/S seconds switchable) | ||
| Pressure fluctuation: | ≤5% | ||
| Equipment power supply: | AC220V, 50HZ, 2.2KW | ||
| When in use, the temperature inside the laboratory must be controlled to (20℃+5℃) to meet the temperature requirements in the test box. | |||
| Add wiring terminals to enable power-on testing | |||
Equipment principle:
High-altitude low-pressure simulation test chamber is also known as aviation simulation transport test chamber. It can reach the low-pressure storage state of the sample in a short time, and can automatically control the test cycle (for example, 6H0, monitor the pressure change in the chamber throughout the process, and realize the automatic termination of the test). The controller is controlled by touch screen, which can form a unified testing standard within the enterprise; the vacuum chamber body is made of plexiglass, which has high transparency and good perspective. It can clearly observe the entire test process and can intuitively reflect the leakage point. It is convenient and flexible to use.
| Inner box material: | SUS201# stainless steel,Thickness 3mm | ||
| Outer box material: | A3 cold plate paint,Thickness 1.5mm | ||
| Pressure range: | 0.5～100Kpa Common test air pressure 11.6 Kpa | ||
| Inner box size: | W500xH500xD500mm | ||
| Outer box size: | W650xH1300xD650 | ||
| Storage partition material: | Stainless steel | ||
| Vacuum display: | Digital vacuum gauge control,accurate display of vacuum degree, easy to set vacuum degree | ||
| Timer: | LED digital display, freely settable within 0-9999 hours (H/M/S seconds switchable) | ||
| Pressure fluctuation: | ≤5% | ||
| Equipment power supply: | AC220V, 50HZ, 2.2KW | ||
| When in use, the temperature inside the laboratory must be controlled to (20℃+5℃) to meet the temperature requirements in the test box. | |||
| Add wiring terminals to enable power-on testing | |||
