 |
| Quantity: | |
|---|---|
hongjin
Product use:
The pulse tester is mainly used for pressure fatigue testing of products. Pulse testing of automotive hose steering pipes, brake pipes, air conditioning pipes, fuel pipes, cooling water pipes, radiator hoses, heater hoses, air filter hoses, worm gears, boost system hoses, engineering hydraulic hoses, aviation hoses and manifolds, other hard pipes or joints, heat exchangers, air conditioners, filters, etc.
Product features:
1. Alternating pressure waveform: basic square wave (square wave, trapezoidal wave), pulse width adjustment can be carried out according to your company's requirements.
2. Test medium temperature is 65℃ (according to customer requirements)
3. The tested piece can test 1 channel at a time (according to customer requirements)
4. Advanced technology, reasonable structural design. Beautiful appearance.
5. All pressure-bearing parts are standard parts of well-known brands, without any welding connection, easy to disassemble, high safety factor, long life and easy maintenance.
6. The boost pressure can be controlled by computer, the pressure curve can be displayed in real time, and the test report can be printed after the test is completed.
7. Proportional control technology is adopted to accurately control the pressure.
8. Various abnormal conditions can be handled, including temperature, pressure, electricity and other abnormal conditions.
9. Automatic recovery of leaking media after disassembly of the tested pipeline;
10. Computer data acquisition and processing, printout of ambient temperature, pressure alternation times and pressure alternation pressure waveform;
11. The number of operating cycles can be freely set during the test, and the test can be automatically stopped when the requirements are met;
12. The test condition of the sample can be observed from the outside during the test, and the observation window is equipped with a protective device;
13. The test pressure-time curve can be displayed on the screen and can be printed or stored in the memory, computer controlled, the memory has a USB interface, and the test pressure curve can be printed;
14. The test system has a pressure sensor calibration interface;
15. Supports automatic data saving when power is off;
16. The experimental data can be revisited, and the experimental results can be queried according to the experimental time, number of experiments, etc.
| Test duration: | 250,000 cycles |
| Test medium: | Water-ethylene glycol mixture |
| Test medium temperature: | 65°C |
| Pressure alternation frequency: | 1HZ (adjustable) |
| Pressure: | 0-0.5mpa-0, one cycle |
| Pressure alternation pressure: | 1mpa (adjustable) |
Product use:
The pulse tester is mainly used for pressure fatigue testing of products. Pulse testing of automotive hose steering pipes, brake pipes, air conditioning pipes, fuel pipes, cooling water pipes, radiator hoses, heater hoses, air filter hoses, worm gears, boost system hoses, engineering hydraulic hoses, aviation hoses and manifolds, other hard pipes or joints, heat exchangers, air conditioners, filters, etc.
Product features:
1. Alternating pressure waveform: basic square wave (square wave, trapezoidal wave), pulse width adjustment can be carried out according to your company's requirements.
2. Test medium temperature is 65℃ (according to customer requirements)
3. The tested piece can test 1 channel at a time (according to customer requirements)
4. Advanced technology, reasonable structural design. Beautiful appearance.
5. All pressure-bearing parts are standard parts of well-known brands, without any welding connection, easy to disassemble, high safety factor, long life and easy maintenance.
6. The boost pressure can be controlled by computer, the pressure curve can be displayed in real time, and the test report can be printed after the test is completed.
7. Proportional control technology is adopted to accurately control the pressure.
8. Various abnormal conditions can be handled, including temperature, pressure, electricity and other abnormal conditions.
9. Automatic recovery of leaking media after disassembly of the tested pipeline;
10. Computer data acquisition and processing, printout of ambient temperature, pressure alternation times and pressure alternation pressure waveform;
11. The number of operating cycles can be freely set during the test, and the test can be automatically stopped when the requirements are met;
12. The test condition of the sample can be observed from the outside during the test, and the observation window is equipped with a protective device;
13. The test pressure-time curve can be displayed on the screen and can be printed or stored in the memory, computer controlled, the memory has a USB interface, and the test pressure curve can be printed;
14. The test system has a pressure sensor calibration interface;
15. Supports automatic data saving when power is off;
16. The experimental data can be revisited, and the experimental results can be queried according to the experimental time, number of experiments, etc.
| Test duration: | 250,000 cycles |
| Test medium: | Water-ethylene glycol mixture |
| Test medium temperature: | 65°C |
| Pressure alternation frequency: | 1HZ (adjustable) |
| Pressure: | 0-0.5mpa-0, one cycle |
| Pressure alternation pressure: | 1mpa (adjustable) |
