Battery High Altitude Low Voltage Test Box

This test case is designed for UL, EN, IEC and other standard test requirements. It can reach the low pressure storage state of samples in a short time, and can automatically control the test cycle, monitor the pressure changes in the whole process, and realize the automatic termination of the test. The simulated cells and batteries are qualified if they are stored for 6 hours at a pressure equal to or less than 11.6kPa and at an ambient temperature of (20±5) ℃, and if there is no leakage, exhaust, disintegration, rupture, or fire, and each experimental cell or battery has an open circuit voltage after the test that is not less than 90% of its voltage before the simulation.

Availability:

Quantity:



Inquire Add to Basket

Product Description

Meet the standard:

GB/T 31485-2015 "Power batteries for electric vehicles safety requirements and test methods" GB/T 31241-2014 "portable electronic products with lithium ion batteries and battery pack safety requirements" UN38.3 "United Nations dangerous goods transport test and standard manual" IEC62133 "composed of batteries (Group) and safety requirements for use in portable equipment UL 1642:2012 Lithium Battery Standard UL 2054:2012 Domestic and Commercial Batteries IEC 62281:2004 Safety Requirements for Lithium galvanic Batteries and accumulators in Transport

Product parameters：

Material of the inner box:	SUS201# Stainless Steel, Thickness 3mm;
Material of outer box:	A3 cold plate baking paint, thickness 1.5mm;
Pressure range:	0.5~100Kpa, commonly used test pressure 11.6Kpa;
Inner box size:	W500xH500xD500mm
Outer box size:	W650xH1300xD650
Material of storage partition:	Stainless steel;
Vacuum degree display:	Digital display vacuum meter control, accurate display vacuum degree, easy to set vacuum degree;
Timer:	LED digital display, can be set freely within 0-9999H (H/M/S seconds can be switched);
Pressure fluctuation:	≤5%
Power supply for equipment:	AC220V, 50HZ, 2.2KW;
When used, the temperature in the laboratory must be controlled to reach (20℃+5℃) before the temperature requirements in the test box can be reached.